Connections Panel; Rear Panel - M-Audio DCP-300 User Manual

8
DCP-300

Connections Panel

13 14
1
MIDI
2
Out
13. Headphone Outputs – Plugging a set of headphones into Headphone Output number 1 will disable
the output from the internal speakers, allowing you to play without disturbing others. Plugging
headphones only into the second (bottom) headphone output will not affect the speakers.
14. MIDI Output – This standard 5-pin MIDI connector sends MIDI output signal, for connecting to a
computer or external MIDI device.
15. USB Connector – This is a standard USB 1.1 connector, for connecting to a computer's USB port.
16. Aux Line In – These RCA connectors allow you to mix an external sound source (such as a CD player or
computer output) with the piano's internal sounds, for playback through the piano's built-in speakers
or headphone outputs.
17. Line Out – These RCA connectors can be used to connect the output of the piano to a stereo sound
system, keyboard amplifier, mixing console or audio recorder. The level of the Line Output is not
affected by the Master Volume slider.
18. Aux Input Level – This adjusts the input level of the signal connected to the Aux Line Inputs.

Rear Panel

19
19. Power Socket – Connect the included 3-pin AC cable here, and plug the other end into an active AC
outlet.
20. Pedal Connector – Connect the pedal board here.
15 16 17 18
USB
AC100-240V – 50/60HZ
CAUTION
Input
Level
PEDAL
20
User Guide