Using Split And Layer Modes Together - M-Audio DCP-300 User Manual

34
DCP-300

Using Split and Layer Modes Together

When Split and Layer Modes are both enabled, Layer Mode will take priority, so the Data Control knob will be
automatically assigned to control the volume level for the Layer Voice. If Layer Mode and Split Mode are both
active, the Layer Voice will be added only to the Main Voice, not to the Split Voice. In other words, playing to
the right of the Split Point will sound the Main and Layer Voices. Playing to the left of the Split Point will sound
only the Split Voice.
Main Voice
Split Voice
‣
To change the Layer Voice:
Function
Voice Select
Layer Voice
Grd Pno + Strings
Up.Bass 090
Layer Voice
Volume
Layer
The LCD will show a combination of all the voice
information, and the Data Control knob value
(which is the Layer Voice volume by default).
<Main Voice>+<Layer Voice>
<Split Voice> <Layer Voice Volume>
For example, the image on the left shows a setup
with Grand Piano as the Main Voice, Strings as the
Layer Voice and Upright Bass as the Split Voice.
Note that the following instructions regarding
using Layer Mode and Split Mode together are
actually the same as if you were using either of the
two modes separately, with the exception of the
method for changing the Split Voice volume (which
is different when using the two modes together).
Press and hold the Layer button while
choosing a Voice Select button.
User Guide