How To Use Your Machine As A Wet Cleaner - Electrolux WET & DRY EXTRACTION VACUUM CLEANERS Owner's Handbook Manual

hose intake (9). See fig. 9.
7. Connect the hose (10) to the
bucket (5) by fitting the threaded
end of the hose (10) into the
hose intake (9) and turn in a
clockwise direction to secure.
See fig. 10.
8. Fit the extension tubes (13) and
other accessories (whichever is
required) to the hose (10). See
fig. 1.
NOTE: The carpet/floor nozzle (14)
has two settings. Each can be
selected by using the foot-operated
switch on the left hand side of the
nozzle.
• When cleaning hard floors, the
bristles should be in the extended
position.
• When cleaning carpets the
bristles should be in the retracted
position.
9. Once all the required accessories
have been fitted together, plug
the mains lead into the wall
Fig. 9
NOTE: You can control the amount
of suction that you require by
opening and closing the suction
regulator (12) which is conveniently
placed on the curved handle (11).
See fig 12.
Fig. 10
HOW TO USE YOUR MACHINE
1. Assemble your vacuum cleaner
2. Fit the foam filter (16) ensuring
7
socket and press the on/off
switch (2) to start vacuuming.
See fig. 11.
AS A WET CLEANER
using the components shown in
fig. 2.
it completely covers the float
cage. See fig 13.
Fig. 11
Fig. 12
Fig. 13