Advertisement
Available languages
Available languages
appliance are kept free from blockages
and do not insert any objects into these
orifices/vents.
•
Do not use without dust container or
filters in place.
•
If the motor overheats, it will turn off
automatically. If this occurs, press the
on off button and wait a few minutes
before switching on again.
•
Extra care should be taken when
vacuuming staircases.
•
It is dangerous to alter the
specifications or modify the vacuum
cleaner. Use only accessories
recommended by Electrolux.
•
Under no circumstances should the
customer attempt to repair the vacuum
cleaner.
•
The vacuum cleaner should only be
repaired and/or serviced by an
authorized Electrolux service centre
and only genuine Electrolux spare parts
should be used. Failure to do so may
render the warranty void.
This vacuum cleaner is for household
use only.
Important!
This vacuum cleaner must only be
connected to a power supply whose
voltage and frequency comply with
the specifications given on the
appliance rating plate.
Quick Guide
VACUUM CLEANER ASSEMBLING
Always remove the plug from the power
supply before fitting or removing
accessories. Before putting the appliance
into service, please check if all filters are
inserted correctly.
Assembly of the flexible hose
•
Insert the flexible hose until the catches
click to engage. Press the catches to
release the hose.
Fitting extension tubes and accessories
•
Fitting the extension tube to the handle.
•
Fitting the brush to the extension tube.
•
Fit a chosen nozzle:
-
Floor brush is intended for cleaning
hard floors and carpets.
-
Crevice/upholstery nozzle is for
cleaning corners and between
cushions.
4
Advertisement
