Guided Setup - DirecTV H23 User Manual

Guided Setup

Now that your receiver and equipment are all hooked up and plugged in, you're ready to
complete setup to begin enjoying your DIRECTV® service.
1) Make sure the MODE switch at the top of the remote control is set to DIRECTV, which is the far-
left position.
2) Press TV POWER ON. Th e DIRECTV HD Receiver will turn on.
3) Th e fi rst screen will allow you to select a language. Using the arrow keys on the remote control,
move to the language you prefer and press SELECT.
4) You will see a Welcome screen.
HDTV settings in Guided Setup
Several screens in the Guided Setup process are related to HDTV:
TV Ratio Screen: Th is screen lets you select your TV's aspect ratio: 4:3 or 16:9.
TV Resolutions Screen: As you select each resolution, an onscreen message asks if you can still see the
screen properly. If you can, press the INFO key. If not, the unsupported resolution is turned off after
a few seconds. If you turn on Native mode, the receiver will automatically adjust resolution to match
the resolution of individual TV programs as they are tuned.
68
AV1 AV2 TV
TV TV
POWER
INPUT
ON
PWR
TIP
You may decide to set up,
change or adjust some of
the settings later. When
MENU
you're ready, press MENU
on your remote, press
SELECT
SELECT on Help & Settings
then select Setup.
The User Guide
that came with
your TV will help
you set the HDTV
settings properly.