Setting Vibration - Sanyo ZIO User Manual

2.
Touch a ringtone from the available list. The
ringtone briefly plays when selected.
3.
Touch OK to assign a ringer.
Enabling Other Sound Features
You can set the device to play an audible tone or to
vibrate when you use the phone keypad, touch the
screen, or lock and unlock the screen.
1. Touch > >
Settings
2.
Touch
Audible touch tones
,
Screen lock sounds or Haptic feedback
the feature.
Audible touch tones
phone keypad.
Audible selection plays a sound when making
any onscreen selection.
Screen lock sounds
and unlocking the screen.
Haptic feedback vibrates when pressing keys and
on certain UI interactions.
> .
Sound
, ,
Audible selection
to activate
plays a tone while using the
plays a sound when locking
Adjusting the Volume Settings
Adjust the volume settings of ringtones, media sounds,
and alarm sounds to suit your needs and your
environment.
1.
Touch > > Settings
2. Drag the onscreen slider to adjust the volume level
for each setting.
Note:
If you clear the "Use incoming call volume for
notifications" check box , you can select the notification
volume separately.
3.
Touch .
OK
Tip:
You can adjust the ringer volume in standby mode (or
the earpiece volume during a call) by using the volume
button on the left side of your device.

Setting Vibration

To set the vibration pattern:
1. Touch > >
Settings
2.
Touch ,
Always Never
Only when not in Silent mode
> Sound > Volume
> >
Sound Vibrate
, ,
Only in Silent mode or
.
2B. Settings
.
.
39