Important Connection Information - Sanyo ZIO User Manual

1.
Connect your device to your computer using a
compatible USB cable. (Wait for the connection to
be completed. When connected, the host
computer will automatically detect your device.)
2.
Touch
Turn on USB storage
between your computer and your device's
microSD card.
3. Locate the newly created drive letter on your
computer. You can now begin to use the microSD
card as a storage device.
To remove the connection:
1.
When you have finished transferring data, click the
USB device icon on you computer's taskbar, and
follow the onscreen instructions to safely unplug
the USB cable.
2.
Drag the status bar down, touch
Turn off USB storage
unplug the USB cable.

Important Connection Information

No driver installation is required for Windows 2000/
ME/XP/Vista/7 users. If you use Windows 98/98SE,
> to copy files
OK
> and
Turn off USB storage
you have to download and install the USB Mass
Storage Driver from the Sprint website at
www.sprint.com .
To avoid loss of data, DO NOT remove the USB
cable, the microSD card, or the battery while files are
being accessed or transferred.
DO NOT use your computer to change or edit folder
or file names on the microSD card, and do not
attempt to transfer large amounts of data from the
computer to the microSD card. Doing so may cause
the microSD card to fail.
DO NOT turn off or restart your computer, or put it
into standby mode, while using a mass storage
device. Doing so will result in loss or damage of data.
The internal microSD card can only be mounted for
use by either the device or a connected computer.
Prior to accessing the card via a different method, it
must first be unmounted from its current device
(device or computer-USB).
Important:
The internal microSD card can only share a
connection with one device at a time, either your
device or your computer (via its USB connection),
not both.
2G. microSD Card 73