Main Menu, Navigation And Setup; Configure Video Output; Overview; Analog Video Scaler - Krell Industries EVOLUTION 707 Owner's Reference Manual

Main Menu, Navigation and Setup

CONFIGURE VIDEO OUTPUT

1.
2.

Overview

Confi gure video output sets the analog video scaler to an appropriate video output resolution.
Analog video can be up-scaled up to 1080P 60Hz allowing video parity for all video sources Once
this has been set all analog video sources will be up-scaled and output to this resolution. HDMI
inputs are NOT affected by this setting.
NOTE: Make sure your video display is capable of displaying the output resolution selected, a series
of error messages requiring user response will appear if the output resolution is set incorrectly.

Analog Video Scaler

A.

Setting maximum Video output resolution

These are the available analog scaler output formats
480i - 720 x 480 60Hz
480p - 720 x 480 60Hz
576i - 720 x 576 50Hz
(Outside the USA)
576p - 720 x 576 50Hz
(Outside the USA)
720p - 1280 x 720 50Hz
(Outside the USA)
B.

Setting Zone 2 video output resolution

The Evolution 707 has a separate set of video outputs available specifi cally to operate a
second video system or zone. These signals can be routed to an entirely different system
and operated separately from the main zone system. The second zone video can be output
over component, s-video or composite video terminations.
NOTE: The zone two video can only utilize analog video sources, HDMI inputs cannot output
zone 2 video, however any component, s-video or composite video can be output to zone 2
video.
720p - 1280 x 720 60Hz
1080i - 1920 x 1080 50Hz
(Outside the USA)
1080i - 1920 x 1080 60Hz
1080p - 1920 x 1080 24Hz
1080p- 1920 x 1080 25Hz
(Outside the USA)
1080p - 1920 x 1080 30Hz
1080p - 1920 x 1080 50Hz
(Outside the USA)
1080p - 1920 x 1080 60Hz