Alarm - JVC VN-T216VPRU Instructions Manual

Fixed hd ip dome camera
Hide thumbs Also See for VN-T216VPRU:
Table of Contents

Advertisement

Alarm

External Digital Input 1
When alarm input is connected, the camera triggers an alarm only when the
normal state (open or closed) changes. Connect external devices such as
sirens or flashing lights to the alarm output connector to signal users of the
camera that an alarm is activated.
1.
Alarm Input
Set the Alarm Input as "Alarm Input" or "OFF".
2.
Input Type
Choose Normally Open or Normally Close
Figure 4-16 External Digital Input1
Motion Detection Settings
This function is designed to record video when the camera detects a motion.
Figure 4-17 Motion Detection Settings (For 720P Series Camera)
Motion Detection :Users can choose to use this function or not by
selecting "ON" or "OFF"
Area:Set the area you want to trigger motion detection when there is
something moving in your selected area.
Sensitivity:Users can choose different levels of sensitivity which are
1~100.
Object: Users can choose different Object size which are 1~100.
Alarm Output
Alarm Mode: Set the Alarm Mode as Event. By alarm input or motion
detect, alarm output works.
Output Hold Time: Users can choose the hold time of alarm which can
be 0s, 5s, 10s, 15s and 30s.
37

Advertisement

Table of Contents
loading

Table of Contents