Auto Volume User Interface Operation - Bose FreeSpace E4 Series II Owner's Manual

7.4 Auto Volume user interface
operation
The Auto Volume user interface provides source selection, vol-
ume up/down, and Auto Volume on/off controls.
Auto Volume User Interface
Select LINE 1
input source
Select LINE 2
input source
Select LINE 3
input source
• Press 1, 2, or 3 to select the audio source connected to the
LINE 1, LINE 2, or LINE 3 input, respectively. A green LED indi-
cates the active source.
• Press (Volume up) or
decrease the volume in 2 dB steps. Press and hold for continu-
ous increase/decrease. The red LED lights when either button
is pressed.
• The maximum/minimum volume setting is determined by the
min./max. level stop settings in the Output Gain control pane.
• Press (Auto Volume) to turn the Auto Volume function on
or off. The yellow LED lights when Auto Volume is on.
• When the Auto Volume function is on, pressing
or (Volume down) turns Auto Volume off.
Press to turn Auto Volume on again.
• When you turn Auto Volume off using the wall plate, the system
remembers the volume level setting at the time you turned it
off. The volume level returns to that level when Auto Volume is
turned on again.
7.0 User Interface Operation
Volume up
(2 dB steps)
Volume down
(2 dB steps)
Auto Volume
on/off
(Volume down) to increase or
(Volume up)
Auto Volume User Interface Example
WALL PLATE 1 WALL PLATE 2
ZONE OUT 1 ZONE OUT 2
ZONE 1
Speakers
60 of 80
WALL PLATE 3
ZONE OUT 3
ZONE 2 ZONE 3
Speakers Speakers
WALL PLATE 4
ZONE OUT 4
ZONE 4
Speakers