Viewing And Changing Event Settings; Removing Events From The List - Bose FreeSpace E4 Series II Owner's Manual

Adds a zone Source Change event
This event allows you to change the source at a specified time on
selected days of the week.
Adds a zone Auto Volume event
This event allows you to turn Auto Volume on or off at a specified
time on selected days of the week.
Programmer's Note: Do not schedule an Auto Volume
event on a zone that is not set up for Auto Volume.
Programmer's Note: Events are only saved to the E4
unit when you click the
ration) button.
5.0 Using FreeSpace
(Flash Hardware Configu-
Installer™ Software
®
5.5.3 Viewing and changing event
settings
To view any event and change the settings, first click the system
or one of the zone tabs. Then select an event in the list to display
the event settings in the control pane. Now, you can edit the set-
tings just as when an event is added.

5.5.4 Removing events from the list

To remove an event from the list, select the event by clicking on it
and then click the
Programmer's Note: After changing any event settings
or removing an event from the list, you must flash the
hardware in order for the change to take effect.
42 of 80
(Remove Event) button.