Rack Mounting The E4 Unit - Bose FreeSpace E4 Series II Owner's Manual

4.5 Rack mounting the E4 unit

Required accessory: FreeSpace
(PC029858)
Rack ears
The E4 unit requires three 1.75" (4.4 cm) rack space units with a
16" (40.6 cm) inside depth (including the rear supports). When
mounting, use four screws with washers to prevent marring the
front panel. Neoprene rubber washers are a good choice
because they grip the screw head and prevent the screws from
backing out from vibration or during transportation.
Installer's Note: If the E4 unit is to be transported while
mounted in a rack, be advised that the rear of the E4 unit
must be mechanically supported. Install a shelf under the unit
or use brackets in such a way as to support the rear of the
unit. Failure to use proper mounting hardware may result in
damage to the E4 unit during transport.
4.0 Hardware Installation
®
E4 System Rack Mount Kit
(8) #8-32 x 1/2 in
Attaching rack ears to the E4 chassis
Attaching the E4 chassis to the rack
(mounting screws not provided)
26 of 80