Table of Contents
Advertisement
2. Search for a new station as described in the section above.
3. Tap the CHANNEL "B" button within 20 seconds of finding the sta-
tion to save the current station.
4. If you don't save the station, the Radio will exit search mode with-
out saving the current station. You can still continue to listen to the
current unsaved station. Tapping the CHANNEL "B" Button in this
case will move to the next saved station.
You can store up to six stations.
7.2 CABLE CONNECTING YOUR MP3 PLAYER OR OTHER
EXTERNAL AUDIO SOURCES
Using the auxiliary line-in port for cable connectivity
Your scala rider G4 headset has an auxiliary jack which allows you to
connect non-Bluetooth audio sources, such as MP3 players (with 3.5
mm - 1/8" stereo jacks) to the headset by using the enclosed cable.
1. Make sure the headset is on Standby mode, flashing slowly in Blue.
2. Connect the MP3 cable to your MP3
player/audio source's
headset jack and insert the
other end of the cable into
the Auxiliary jack.
3. Operate the MP3 Player
device by using its own
buttons as usual (FF/REW/
PLAY/PAUSE).
Volume can be adjusted through the MP3 Player or the Volume
Buttons of the headset.
Any other audio connection will automatically mute the MP3 Player. The
audio signal will return only when headset is once again in Standby mode.
12
scala rider
G4
PowerSet
®
™
MP3 /Aux
jack
NOTE: While listening to your MP3 player, the VOX feature is disabled
8. USING THE MOBILE PHONE
INITIATING AND RECEIVING MOBILE PHONE CALLS
BASIC FUNCTIONS
Answer a call
During an incoming call, tap the Mobile But-
ton or speak loudly any word of your choice
Reject a call
Remain silent for 15 seconds, OR press and
hold the Mobile Button for 3 seconds during
an incoming call
Terminate a call
Tap the Mobile Button during a call, or let the
other party terminate the call
Voice Dial
During Standby, tap the Mobile Button and pro-
nounce loudly the name of the person you wish
to call. This feature is supported only by mobile
phones that include the Voice Dial feature
Redial
During Standby, tap the Mobile Button twice
ADVANCED FUNCTIONS FOR 3-WAY COMMUNICATION:
Add/Remove CHANNEL
Tap the CHANNEL "A" button while on a phone
"A" headset to/from
call
phone call
Add/Remove CHANNEL
Tap the CHANNEL "B" button while on a phone
"B" headset to/from
call
phone call
When the headset is on an active phone call, any Intercom call
request will be automatically rejected.
Once the phone call is terminated, you can initiate and accept Inter-
com calls.
Advertisement
Table of Contents
