Ethernet Settings; Windows Ce Ethernet Cradle - Datalogic Kyman User Manual

USE AND FUNCTIONING
3.8.5

Ethernet Settings

Windows CE Ethernet Cradle

Datalogic Kyman™ can be connected to an Ethernet network by inserting it into the
Datalogic Kyman™ Ethernet Multi Cradle.
When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installed
on the mobile computer will automatically run, and using the DHCP service, will
dynamically assign the IP Address.
1. From the Datalogic Kyman™ open Internet Explorer>Internet Options and check
use LAN no autodial then OK.
2. From the Datalogic Kyman™ > Explorer, enter the IP address or the PC
name in the address bar. You may be required to enter your network
username and password. The LAN connection will take place and you will
be able to see the PC shared folders and exchange files.
If your network provides Internet Service and does not use a proxy server you can
directly access the Internet. Otherwise set the internet proxy parameters according to
your network settings.
3
53