Data Capture Configuration; Configure - Datalogic Kyman User Manual

USE AND FUNCTIONING
3
3.7

DATA CAPTURE CONFIGURATION

From the Windows CE Taskbar, tap the "Decoding" icon to open a drop–down menu.
Decoding can also be accessed from the Control Panel.
By selecting the Info item from this drop-down menu you can access information
about the Scanner and the Software; the Configure item opens the configuration
applet (Data Capture Configuration Window), while Capture accesses the data
capture applet (Data Capture Window), which enables code reading.
The last menu item ( Wedge ) enables Wedge Emulation.
From the Windows Mobile Start menu, tap Settings -> System -> Data Capture. The
"Data Capture" icon opens the configuration applet (Data Capture Configuration
Window).
Windows CE Windows Mobile
3.7.1

Configure

The Configuration applet contains the barcode scanning configuration parameters in
a directory tree structure. The available barcode parameters are divided into two
groups: Reader Parameters and Scan Parameters.
The Reader Parameters depend on the type of scanner module installed on the
mobile computer and allow barcode configuration (i.e. enable/disable Code 39, check
digit control, etc.).
39