Bluetooth® Manager Device Setup - Datalogic Kyman User Manual

3
3.8.2 Bluetooth® Manager Device Setup
In order to enable a Bluetooth
perform the discovery procedure and enable the device as follows:
1. Place the Bluetooth
2. From the "Connections" folder double tap on
the "Bluetooth" applet to open the Bluetooth
Manager Device window:
3. Tap on the "Me" button to enter the related
window; then, tap on the "ON" button to
activate the Bluetooth
activation may be also performed by using the
WIRELESS
described in par. 3.7.4.
By tapping on the "HW Details" and "SW
Details" buttons, information about the mobile
computer Bluetooth
will be displayed,
Encryption" button starts encryption of the
®
Bluetooth communication data. If tapping on
the "Close" button the Bluetooth
Device window will be closed.
52
®
device for communication with the Kyman™ you must
®
device within the range of the Kyman™ (10 meters).
®
module. The module
COMMUNICATION
®
hardware and software
while
®
applet as
the "Enable
®
Manager
KYMAN™