Imager Data Capture - Datalogic Kyman User Manual

USE AND FUNCTIONING
3
3.3.2

Imager Data Capture

To read a 1D or 2D code, simply point the Kyman™ Imager model onto the code
from a distance within the reading range (See par. 5.1, section Kyman™ Imager
Optical Features) and press the SCAN key.
The Kyman™ Imager uses an intelligent aiming system pattern similar to those on
cameras, which indicates the field of view which should be positioned over the code:
Aiming System
If the aiming system pattern is centered over the entire symbology as shown in the
following figure, either wait for the timeout or release the Scan key to capture the
image.
23