Getting Started - Timex T105 User Manual

Getting Started

Installing the Backup Battery
Installation of Backup Battery
If the Backup Battery has been installed and a power failure occurs or the
AC cord is accidentally disconnected, the current time and alarm time
settings will be temporarily maintained.
If the Backup Battery has not been installed or is dead, when the AC
power resumes the display will show 12:00 and you must reset the time
and alarm settings.
1. Open the battery compartment cover located on the bottom of the unit.
2. Install a CR2032 battery.
3. Close the battery cover.
AC adaptor
The unit comes with an AC adaptor that must be used to power the unit (do not try to run on back up battery).
Plug the cable into the DC jack located inside battery compartment on the bottom of unit and plug the other end into AC wall
outlet.
Maintenance
Protect your furniture when placing the clock on natural wood or a lacquered wood finish. A cloth or other protective material
should be placed between the unit and the furniture.
Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents may damage the
surface of the case.