Using The Alarm; Snooze Operation; Color Change - Timex T105 User Manual

1. After setting the alarm time, set the Alarm Switch located on the back of the unit to ON to turn on the alarm. The Alarm
Indicator Icon will appear on the display, showing that the alarm will sound at the time displayed.
2. After the alarm sounds, press the Alarm Set/Reset Button to turn off the buzzer and automatically reset the alarm for
the same time the following day.
3. To turn off the alarm without setting it for the following day, switch the Alarm Switch to OFF. The Alarm Indicator Icon
will disappear.
NOTE: The alarm will sound for approximately 1 hour and then turn off automatically. This cycle will repeat every 24 hours unless
the controls are changed.
1. Press down anywhere on top of the clock cabinet after the alarm sounds to temporarily shut off the alarm, allowing you to
snooze for nine minutes before the alarm sounds again. You may repeat this several times during the one-hour alarm cycle.
1. During normal mode, press anywhere on top of the clock cabinet to change the color of cabinet and display backlight.
Each time you press, the light color changes (there are 7 colors).
2. You can control the backlight brightness by setting the Dimmer Switch to Hi, Med or Lo.

Using the Alarm

Snooze Operation

Color Change

6