Advertisement
Available languages
Available languages
Bridge in
9
This RCA jack receives signal from the master amplifier when this amplifier is bridged
as slave. DO NOT use input jacks when the amplifier is working as slave. All the
functions will be adjusted by the master amplifier.
Bridge out
10
This RCA output sent out bridge signal to another same Class D amplifier in bridging
configuration
Low Pass Filter
11
Filter out high frequency that the woofer can't play. Adjust this knob to match the
woofer's frequency response.
SUBSONIC
12
Filter out unwanted too low frequency. This function will increase the power handing
of your woofer's. It can adjust the frequency filter from, 10Hz (OFF) to 50Hz.
Bass boost Frequency
13
Adjust the boosted center frequency. The frequency can be adjusted from 0Hz to 80Hz,
use combine with bass boost level adjusting.
Bass boost Level
14
Adjust the boosted frequency from 0 ~ 12dB.
15
Alarm Indicator
When this LED light up, the amplifier may in self-test mode (when power up) or
malfunction. Shut down the amplifier immediately can find the reason before power
up amplifier again.
- 2 -
English
Advertisement
