Advertisement
GENERAL SAFETY RULES
(For All Battery Operated Tools)
WARNING! Read and understand all instructions. Failure
to follow all instructions listed
below,
may result
in
electric
shock, fire and/or serious personal injury.
-
SAVE THESE INSTRUCTIONS
Work Area
Keep your
work
area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such a s in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to loose control.
P
Electrical S a f e t y
Do not abuse the cord. Never u s e the cord t o carry the tool. Keep cord away
from heat, oil, sharp edges, or moving parts. Replace damaged cords immedi-
ately. Damaged cords may create a fire.
A battery operated tool with integral batteries or a separate battery pack must
be recharged only with the specified charger for the battery. A charger that
may be suitable for one type
of
battery may create a
risk of fire
when used with
another battery.
9
Use battery operated tool only with specifically designated battery pack. Use
of any other batteries may create a risk
of
fire.
Personal Safety
Stay alert, watch what you are doing, and use common sense when operating
a power tool. Do not use tool while tired
or
under the influence of drugs, alcohol,
or medication.
A moment
of inattention while operating power tools may result
in serious personal injury.
Dress properly. Do not wear
loose
clothing
or
jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry,
or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch
is
in the locked
or
off position before
inserting battery pack. Carrying tools with your finger on the switch or inserting
the battery pack into a tool with the switch on invites accidents.
Remove adjusting keys or switches before turning the tool on. A wrench
or
a key that
is
left attached to a rotating part of the tool may result in personal injury.
Do not overreach. Keep
proper
footing and balance at all times. Proper footing
and balance enable better control of the tool in unexpected situations.
8
-A
2
'
15
Advertisement
