Fan Replacement
FinishPro 390
Removal
1. Relieve pressure, page 7. Disconnect power cord
from outlet.
2. Remove two screws (30) and shroud (29).
29
FinishPro 395
1. Relieve pressure, page 7. Disconnect power cord
from outlet.
2. Remove four screws (12) and shroud (23).
3. Remove retaining ring (126) on fan (125).
4. Pull off fan.
Installation
1. Slide new fan (125) on back of motor. Be sure
blades of fan face motor as shown.
2. Install retaining ring (126).
3. Replace shroud (23) and four screws (12).
311911C
1b
30
3. Remove spring clip (1b) on back of motor.
4. Pull off fan (100).
Installation
1. Slide new fan (1a) in place on back of motor. Be
sure blades of fan face motor as shown.
2. Install spring clip (1b).
3. Replace shroud (29) and two screws (30).
1a
23
12
126
Fan Replacement
ti9269a
125
ti9604a
17