Fan Replacement
Removal
WARNING
Read Electric Shock Warning, page 3 and Pressure
Relief Procedure, page 7.
1. Relieve pressure, page 7. Disconnect power cord
from outlet.
2. Remove two screws (30) and shroud (29).
29
310824C
100
101
30
ti5769a
3. Remove spring clip (101) on back of motor.
4. Pull off fan (100).
Installation
1. Slide new fan (100) in place on back of motor. Be
sure blades of fan face motor as shown.
2. Install spring clip (101).
3. Replace shroud (29) and two screws (30).
Fan Replacement
17