Throttle Linkage And Engine Mounting - Zenoah G200PU Owner's Manual

THROTTLE LINKAGE AND ENGINE MOUNTING

● Mount the throttle arm to
the carburetor's throttle
shaft as shown in the
diagram.
● Mount the engine as shown
in the diagram.
Gloves
10cm
Tightening torque:
90kg-cm
(8.8 N-m)
Stopper screw
Throttle arm
CG line
9kg
● For propeller mounting, use the
wrench provided and make sure
not to over-tighten the bolts.
Shaft diameter: 4mm
M4 bolt x4
CG line
Engine mount
Fuselage bulkhead (firewall):
8mm or more, with hard plate
Claw nut x4
9