Starting The Engine - Zenoah G200PU Owner's Manual

STARTING THE ENGINE

● Close the choke lever and open the throttle valve 10% to 15%.
● Pressing the tip of the starter to the engine's spinner, press the start switch for 1-2 sec and
let the engine rotate.
● If the engine makes an explosive sound, suspend the starting operation and start by
opening the choke lever and rotating the engine using the starter. (Opening or closing the
choke lever during engine operation is prohibited.)
● If the engine will not start, leave the choke lever in the open position and rotate the engine
by pressing the starter for 1-2 sec. --- If the engine will not start, repeat this operation 2 or 3
times.
(A) Points in starting
● During the first startup operation, does the fuel reach the carburetor?
● If the fuel reaches the carburetor, the choke will open.
● Is the ignition switch on?
● If there is absolutely no explosive sound, remove the sparkplug and check it.
● If leakage has occurred from the sparkplug being over choked, dry it out, open the choke, and
restart.
(B) Cautions in starting
● One person must restrain the fuselage during the startup operation. (Thus, solo startup is
prohibited.)
● With the sparkplug removed when using the starter for rotation or rotating the propeller by hand,
make sure the power has been turned off.
● Rotation should be to the left. Confirm the direction of motor rotation in advance.
11