Alto AMX-180 User Manual page 17

18-channel, with digital effects
Table of Contents

Advertisement

5.1. Some Final Tips on Wiring Configuration
You can connect unbalanced equipment to balanced inputs and outputs. Simply follow these schemes.
Ring=Right Signal
Tip
Sleeve
Ring
Strain Clamp
Tip=Left Signal
Sleeve=Ground/Screen
Use for Headphone, Stereo Return
1/4" Stereo (TRS) Jack Plug
Tip
Sleeve
Tip=Signal
Strain Clamp
Sleeve=Ground/Screen
Use for Mono Line In, Mono 1/4"Jack Plugs
1/4" Mono (TS) Jack Plug
Ring=Return Signal
Tip
Sleeve
Ring
Strain Clamp
Tip=Send Signal
Sleeve=Ground/Screen
Use for Pre-Gain Channel Inserts
1/4" Stereo (TRS) Jack Plug
2
2
1
1
2=Hot(+)
2=Hot(+)
1=Ground/Screen
1=Ground/Screen
3
3
3=Cold(-)
3=Cold(-)
Use for Balanced Mic Inputs
Use for Main output
(For unbalanced use, connect pin 1 to 3)
(For unbalanced use, leave pin 3 unconnected)
3-pin XLR Male Plug
3-pin XLR Line Socket
(seen from soldering side)
(seen from soldering side)
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amx-180fx

Table of Contents