Parameter Screens - Wegener UNITY4650 User Manual

A.4 Parameter Screens
Parameter screens display a specific parameter that can be edited (if the correct
authority has been established). Such screens contain an alphanumeric or list-
select field. There are no carries or borrows when wrapping on a numeric field
(i.e. to go from 0999 to 1000, 4 digits must be edited).
For parameter screens like the Unit Label screen below, the second row con-
tains the current value of the parameter. Upon pressing ENT, a blinking under-
score appears under the first character to be edited (Only for editable
alphanumeric fields. List-select fields will not display a cursor). Use the arrow
buttons to scroll through characters or list selections. After making the desired
change, press ENT again to commit the entry to the U4650. Press ESC if you
wish to cancel the change. If no key presses are made, after a brief delay, the
second row begins alternating between the following prompts:
Change? Press<ENTER>
Home? Hold In <ESC>
second row:
after brief
delay
UNIT LABEL:
Change? Press<ENTER>
wegener.com
Other Screens?
first row:
UNIT LABEL:
Unity4650
UNIT LABEL:
Other Screens?
Unity 4650 User's Manual
(to begin editing the parameter),
(to move to other screens at the same level),and
(to return to the Home screen).
- information label
- editable parameter
UNIT LABEL:
Home? Hold In <ESC>
87 800034-01 Rev. A