Table of Contents
Advertisement
Rack
Your U4650 is sized at a single RU and will fit an EIA-standard, 19-inch-wide
Mounting
equipment rack.
a) First install angle brackets or cross-supports capable of supporting both
b) Place the U4650 on its supports and use four anchor screws or bolts and
The front brackets must be secured to the rack. If front brackets are left
unsecured, the unit may shift forward and fall from the rack during installation
or operation. Failure to secure the front brackets may result in personal injury
and/or damage to the equipment.
Desktop
To set up the U4650 in a desktop environment, place the U4650 on a flat sur-
Installation
face where it will not be subject to spills or impacts. Also route cables to the
unit so that they will not be hit or pulled causing damage to the connectors or
to the unit itself. Ensure a sufficient flow of cool air (See "Reduced Air Flow"
on page 26.) so that the unit's operating ambient temperature range is not
exceeded.
Locate the U4650 and its cables to avoid impacts, spills, and pulling cables
and to ensure sufficient air flow. Failure to locate the U4650 in a proper
environment may result in damage to the equipment.
wegener.com
the unit and its connecting cables. Screw or bolt the supports securely
to the equipment rack.
nuts to secure the U4650 front brackets to the rack.
Unity 4650 User's Manual
WARNING
WARNING
27
800034-01 Rev. A
Advertisement
Table of Contents
