Retrieve The Scanned Files From The Controller - Oce TCS400 User Manual

Retrieve the scanned files from the controller

When to do
The following files are stored local on the controller
Files scanned to a local destination.
■
When you scan to a remote destination and an error occurs, the file is stored
■
in the 'Unsent' folder on the controller.
The scanned files are also stored in the temporary store on the controller,
regardless of the destination you define.
Use File Transfer Protocol (FTP) to retrieve the files from the controller.
How to retrieve the scanned files from the controller
Launch an FTP client.
1
Enter the 'Open' command followed by the host name of the Océ Power Logic
2
controller or the IP address
You can also enter ftp host_name in the FTP client.
Note:
Press Enter.
3
The connection with the Océ Power Logic
A dialog box prompts you for a user name.
Enter the user name 'anonymous' with the password 'anonymous'.
4
Press Enter.
Enter 'bin' to set the transmission mode to binary.
5
Use the command 'cd tempstore' to go to the 'tempstore' directory.
6
Go to the 'scan' directory to retrieve a file from a destination local on the
7
controller.
Go to the 'unsent' directory to retrieve a file from the 'Unsent' folder on the
controller.
Use the 'get' command to retrieve the file. For example 'get floorplan.tif'
8
Use the 'bye' command to quit FTP.
9
84 Océ TCS400 User manual
®
controller is established.
®