Canon FAX-L200? FAX-L280 User Manual page 93

7
Enter up to 125 fax numbers you want
to send to using any of the following
methods:
One-touch speed dialling:
Press the one-touch speed dialling
button(s) you want.
Coded speed dialling:
Press Coded Dial, then use the
numeric buttons to enter the two-
digit code you want. Repeat for other
codes.
• Be sure to press Coded Dial before
each code.
Regular dialling:
Use the numeric buttons to enter the
fax number you want, then press
Set.
• You can only enter one fax number this
way.
n
• If you enter the wrong
destination, press Clear, then
enter the correct destination.
• To review the destinations
entered, use ∂ or ¨ to scroll
through the numbers.
8
Press Start/Copy to begin scanning
the document into the FAX's memory.
• When the preset time is reached, the
FAX sends the document to the
destination(s) you specified in step 7.
n
• You can register up to 20 different delayed sending operations.
• If the FAX's memory becomes full while scanning your document, MEMORY FULL will
appear in the LCD. If this happens, you will not be able to send the document at a preset
time. Remove the remainder of the document from the ADF (you may need to open the
operation panel to do so).
• Since the FAX is multitasking, you can perform other tasks even when your FAX is set
for delayed sending.
Chapter 7
Ex:
TEL=905 795 1111
Ex:
A01
Ex:
TEL=03 3758 2111
Ex:
TEL= 2 887 0166
Sending Faxes
7-15