TP-Link TD-W8960N User Manual page 55

TD-W8960N
4.4.10.2 Static Route
Choose "Advanced Setup""Routing""Static Route". You can see the Static Route screen,
this screen allows you to configure the static routes (shown in Figure 4-51). A static route is a
pre-determined path that network information must travel to reach a specific host or network.
To add static routing entries:
1. Click the Add button in Figure 4-51, and you will see the screen as shown in Figure 4-52.
2. Enter the following data:
IP Version: Select the version of IP.

300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-50
Figure 4-51
Figure 4-52
47