Routing - TP-Link TD-W8960N User Manual

TD-W8960N
After completing the above configuration, click the Save/Apply button to make it take effect and
then you will see the following list as shown in Figure 4-48. If you want to modify the rule, click the
Edit button. If you want to delete the rule, check the Remove box first and then click the Remove
button.

Note:
The priority, max upstream/downstream rate and min upstream/downstream rate work on
allocation of surplus upload/download bandwidth. For rules with different priority, the surplus
bandwidth is firstly allocated to the rule with the highest priority according to its max
upstream/downstream rate. If there still has surplus bandwidth, it is allocated to the rule with
hypo-high priority. For rules with the same priority, the surplus bandwidth is allocated to them
according to their min upstream/downstream rate. The greater a rule's min upstream/downstream
rate is, the more bandwidth it gets.

4.4.10 Routing

Choose "Advanced Setup""Routing", it includes three menus: Default Gateway, Static Route
and RIP (shown in Figure 4-49). The detailed descriptions are provided below.
4.4.10.1 Default Gateway
Choose "Advanced Setup""Routing""Default Gateway", you can see the Default Gateway
screen.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-48
Figure 4-49
46