Checking And Replacing Fuses - Toyota Sienna 2004 Operating Manual

Checking and replacing fuses

Good Blown
Type A
Good Blown
Type B
460
04 SIENNA_U (L/O 0301)
Good Blown
Type C
Good Blown
Type D
If the headlights or other electrical
components do not work, check the
fuses. If any of the fuses are blown,
they must be replaced.
See "Fuse locations" on page 433 in Sec-
tion 7- 1 for locations of the fuses.
Turn the ignition switch and inoperative
component off. Pull a suspected fuse
straight out and check it.
Determine which fuse may be causing the
problem. The lid of the fuse box shows
the name of the circuit for each fuse. See
page 474 in Section 8 of this manual for
the functions controlled by each circuit.
Type C and D—When any of the fuses
are blown, contact your Toyota dealer.
2004 SIENNA from Jan. '03 Prod. (OM45408U)