Driving Position Memory System - Toyota Avalon 2004 Operating Manual

Driving position memory
system
The micro computer can memorize the
position of the driver's seat and outside
rear view mirror. Two different driving
position profiles can be entered into
computer's memory.
Recording a driving position in the
computer's memory can only be done
when the ignition key is in the "ON"
position and the automatic transmission
selector lever is in the "P" position.
46
'04 AVALON U (L/O 0307)
SETTING THE DRIVING POSITION
1. Adjust the driver's seat and outside
rear view mirror to the desired posi-
tion.
2. While pushing the "SET"
push button "1" or "2" until the sig-
nal beeps.
The beep sound means that the positions
are recorded in the computer's memory.
By repeating these two steps and pressing
the remaining button, the driving position
for another driver can be recorded.
To set a new memorized position, select
the desired position and perform step 2.
The previous memory will be erased and
a new position will be set.
To make only slight changes to an already
memorized position, the easiest way is to
first activate the memorized position, then
make the desired changes and perform
step 2 above.
button,
2004 AVALON from JUL. '03 Prod. (OM41404U)