Brake Pad Wear Limit Indicators; Your Toyota's Identification - Toyota Avalon 2004 Operating Manual

BRAKE ASSIST SYSTEM
When you slam the brakes on, the
brake assist system judges as an emer-
gency stop and provides more powerful
braking for a driver who cannot hold
down the brake pedal firmly.
When you slam the brakes on, more pow-
erful braking will be applied. At this time,
you may hear a sound in the engine
compartment and feel the vibration of the
brake pedal. This does not indicate a mal-
function.
The brake assist system becomes opera-
tive after the vehicle has accelerated to
a speed in excess of approximately 10
km/h (6 mph). It stops operating when the
vehicle decelerates to a speed below
approximately 5 km/h (3 mph).
For an explanation of this system's warn-
ing light, see "Service reminder indicators
and warning buzzers" in Section 1- 6.
222
'04 AVALON U (L/O 0307)
Brake pad wear limit
indicators
The brake pad wear limit indicators on
your disc brakes give a warning noise
when the brake pads are worn to where
replacement is required.
If you hear a squealing or scraping noise
while driving, have the brake
checked and replaced by your Toyota
dealer as soon as possible. Expensive ro-
tor damage can result if the pads are not
replaced when necessary.

Your Toyota's identification—

—Vehicle identification
number
The vehicle identification number (VIN)
is the legal identifier for your vehicle.
This number is on the left top of the
instrument panel, and can
through the windshield from outside.
pads This is the primary identification number
for your Toyota. It is used in registering
the ownership of your vehicle.
2004 AVALON from JUL. '03 Prod. (OM41404U)
be seen