Table of Contents
Advertisement
—Top strap anchors and
locations
If your child restraint system requires
the use of a top strap, latch the hook
onto the anchor bracket and tighten the
top strap.
See the following instructions to install the
anchor bracket.
70
Bolt
Spacer
Anchor bracket
380 mm (15.0 in.)
47 mm (1.9 in.)
67.5 mm (2.7 in.)
a. Using the illustration as a guide, run
your fingers across the trim of the filler
panel itself to locate the position of the
holes underneath.
b. Make a hole in the covering directly
above the hole in the filler panel.
c. Insert a 15 mm (0.6 in.) spacer and
tighten down the anchor bracket for your
child restraint system with a bolt. Torque
the bolt to 16.5—24.7 N m (1.68—2.52
kgf m, 12.2—18.2 ft lbf).
'98 AVALON (USA/CANADA)- U
To comply with Canada Motor Vehicle
Safety Standards, vehicles sold in Canada
are provided with a bracket set in the
glovebox, designed for use with any of the
3 anchor locations shown in the illustra-
tion.
If your child restraint system does not
provide any of the necessary parts, ask
your Toyota dealer. (See "—Child restraint
system".)
Advertisement
Table of Contents
