Toyota Avalon 1998 Operating Manual page 116

Table of Contents

Advertisement

AUDIO CONTROL / MODE
Manual tone adjustment function—
This knob is used to adjust the tone
manually.
For
low- pitch
tone
adjustment,
"AUDIO CONTROL / MODE" repeatedly
until "BAS" appears on the display. Then
turn the knob to suit your preference.
The display will show the range from
"BAS -5" to "BAS 5".
With middle- pitch tone—
For middle- pitch tone adjustment, push
"AUDIO CONTROL / MODE" repeatedly
until "MId" appears on the display. Then
turn the knob to suit your preference.
The display
will show the range
"MId -5" to "MId 5".
For
high- pitch
tone
adjustment,
"AUDIO CONTROL / MODE" repeatedly
until "TRE" appears on the display. Then
turn the knob to suit your preference.
The display will show the range from
"TRE -5" to "TRE 5".
116
Sound balance adjustment function—
This knob is also to adjust the sound
balance between the front and rear, and
the right and left speakers.
For front/rear adjustment, push "AUDIO
push
CONTROL / MODE" repeatedly until "FAd"
appears on the display. Then turn the
knob to adjust the front/rear balance.
The display will show the range from "FAd
F7" to "FAd R7".
For
left/right adjustment,
CONTROL / MODE" repeatedly until "BAL"
appears on the display. Then turn the
knob to adjust the left/right balance.
The display will show the range from "BAL
L7" to "BAL R7".
from
push
'98 AVALON (USA/CANADA)- U
CD (Compact Disc)
Push "CD" to switch from radio operation
to compact disc operation. If the audio
system is off, you can turn on the com-
pact disc player by pushing "CD". In both
cases, a disc must already be loaded in
the player.
When the audio is set into compact disc
operation, the display shows the track or,
track and disc number currently being
played. Each time you push "CD", the
push "AUDIO
system changes between built- in single
disc player and automatic changer.
Your audio system shows six different dis-
play if the player malfunctions.
If "WAIT" appears on the display, it indi-
cates inside the player unit may be too
hot due to the very high ambient tempera-
ture. Remove the disc or magazine from
the player and allow the player to cool
down.
If "Err 1" appears on the display, it
indicates the disc is dirty, damaged, or it
was inserted up- side down. Clean the
disc or insert it correctly.

Advertisement

Table of Contents
loading

Table of Contents