Toyota Avalon 1998 Operating Manual page 110

Table of Contents

Advertisement

If "Err 2" appears on the display, it
indicates no disc is loaded inside the
magazine, insert a disc.
If "Err 3" or "Err 4" on the display, it
indicates there is a trouble inside the sys-
tem. Eject the disc or magazine. Set the
disc or magazine again.
If "OPEn" appears on the display, it
indicates the compact disc auto changer
lid is open. Close the compact disc auto
changer lid.
If the malfunction is not recovered, take
your vehicle to your Toyota dealer.
DISC
Compact disc auto changer only—
By using this button, you can select a
disc you wish to listen to.
Push the either side of the button until the
number of the disc you want to listen to
appears on the display.
110
Dolby®
B NR
If you are listening to a tape that was
recorded with Dolby
B Noise Reduction,
push the button marked with the double- D
symbol. The double- D symbol will appear
on the display. Push the button again to
turn off Dolby
B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used for
recording the tape.
: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. "DOLBY" and the
double D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
FM
Push "FM" to switch the FM band. "FM1"
or "FM2" will appear on the display. This
system allow you to set twelve FM sta-
tions, two for each button.
If the audio system is off, you can turn
on the radio by pushing "FM". Also, push
"FM" to switch from cassette or compact
disc operation to radio operation.
'98 AVALON (USA/CANADA)- U
MTL (Metal) Display
Type 1- 2 only
If a metal or chrome equivalent cassette
tape is put in the cassette player, the
player will automatically adapt to it and
"MTL" will appear on the display.
PROG (Program)
Push "PROG" to select the other side of
a cassette tape. The display indicates
which side is currently selected ("
cates
top
side,
"
"
indicates
side).
Auto- reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
" indi-
bottom

Advertisement

Table of Contents
loading

Table of Contents