Optional Battery Case; Regular Charging - Icom IC-A24E Instruction Manual

Regular charging

ï
q Attach the battery pack to the transceiver.
w Be sure to turn the transceiver power OFF.
e Connect the Wall charger or optional cable (CP-20) as
shown below.
r Charge the battery pack approximately 8 hours, depend-
ing on the remaining power condition.
DO NOT charge the BP-210N more than 12 hours. Other-
wise, the BP-210N will be damaged.
• NEVER
tion could cause a fire or electrocution.
• NEVER
IC-A24E/A6E with the
cable when disconnecting/connecting
attached battery pack
the CP-20 from/to the cigarette lighter
Turn power OFF
socket.
Wall charger
To [DC 11V]
R WARNING!
modify the CP-20. A modifica-
cut or fray the CP-20's power
CP-20 (for 11 24 V)
(optional)
To the cigarette
lighter socket
To AC outlet
The shape may
differ depending
on the version.

Optional battery case

■
When using a battery case attached to the transceiver,
install 6 × AA (LR6) size Alkaline batteries, as illustrated
below.
q Remove the battery case from the transceiver.
w Install 6 × AA (LR6) size Alkaline batteries.
• Be sure to observe the correct polarity.
CAUTION:
• When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new
and old batteries together.
• Keep battery contacts clean. It's a good idea to clean
battery terminals once a week.
8
BATTERY PACKS
8
27