If RAC Spray Tip Clogs
WARNING
Read warnings, page 3.
1.
If spray tip clogs while spraying, stop spraying
immediately.
2.
Engage trigger lock.
3.
Rotate RAC tip handle back 180° (arrow points
back).
4.
Disengage trigger lock.
5.
To remove clog, trigger gun into a pail or onto the
ground.
6.
Engage trigger lock.
10
TI1952A
7.
Rotate RAC tip handle (G) to spraying position
(arrow points forward).
G
8.
If tip is still clogged:
a.
Engage trigger lock.
b.
Shut off sprayer and disconnect power
source.
c.
Open fluid drain valve to relieve pressure.
d.
Remove and clean GHD RAC spray tip.
Maintenance
309523D