Options - Harman Stove Company XXV Installation & Operating Manual

XXV Top Flue Option - Harman® Part #1-00-677120
The Top Flue option attaches to the exhaust on the rear of
the stove, and extends it to the top with a six inch stub.
This gives the appearance of a wood stove and also allows
venting with existing single wall, connector.
A 12 inch piece of 4" pellet vent is included to act as an
insulator only. Note: The top flue adaptor is not approved for
use with pellet vent pipe. It is only tested for use with chimney
connector (6- inch pipe) into an existing "class A" chimney.
Direct Vent Wall Passthrough
The Harman® Direct Vent Wall Passthrough makes installing
your Harman® Pellet Stove with outside air a lot easier. It is
made to fit walls from 4 1/2" up to 10 1/8" thick with a square
opening of 6" to 6 1/2".
28
XXV Pellet Stove

Options

Harman® Part #1-00-677077
Adjustable from 4 1/2" to 10 5/8" wall thickness
Passthrough
hole for 3" PL
vent pipe
Outdoor Half
Indoor Half
3-90-00684R22_04/13
Side View