Sanyo KS0971 Technical & Service Manual page 74

3. How to set the ON time
4. How to set DAILY ON/OFF
REPEAT timer
To cancel a timer program
NOTE
18
Setting the Timer (continued)
(Example) To start operation at 7:10 am.
Operation
1. Press the ON TIME setting
button once.
2. Press the Advance, Return ( ,
) button until AM 7:10 is
displayed.
3. Wait a few seconds, and then
the setting is complete.
(Example) To start operation at 7:10 am. and stop the air conditioner at 11:00 am.
10:30 pm.
Present time
1. Set the timer ON/OFF times as
shown in 2-1, 2, 3 and 3-1, 2, 3.
• The ON/OFF combination timer uses the current time as the
NOTE
reference, and it is activated starting from whichever set time
comes first.
• With the ON/OFF combination timer, the settings are repeated
every day.
• You can check the timer ON/OFF times after you have set them
by pressing the ON TIME and OFF TIME setting buttons.
• Press the CANCEL button.
• When either an ON or OFF timer is to be canceled, press the button
corresponding to the timer whose program is to be canceled, and then press
the CANCEL button.
• The airflow direction, fan speed and temperature setting can be changed after
a timer program has been set even when the unit is stopped. Even when
operation is stopped during an ON timer program, the unit will start operating
when the set time is reached provided that the program is not canceled.
• When the ON timer and OFF timer are set to the same time, the timer
operates as if it is turned off.
Indication
The timer indication is displayed,
and the present ON time is shown.
The timer indication blinks.
The time can be set in 10-minute
increments. Holding down the button
advances the time rapidly in 10-minute
increments.
The timer indication stops
blinking and the present time is
displayed.
7:10 am. 11:00 am.
ON OFF
The present time 10:30 pm. and
are displayed.
OI-803-18-EG