Table of Contents
Advertisement
Changing Shooting Function Settings
If you set the mode dial to G, you can change the settings in the 4 tab
(p. 43).
Before attempting to shoot using a function explained in this section in
modes other than G, check if the function is available in those modes
(pp. 200 – 203).
Switching the Focus Setting
The camera focuses on whatever it is aimed at even when you do not press
the shutter button. However, you can set it so that the camera only focuses
when the shutter button is pressed halfway.
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
Choose [Continuous AF], then press the
qr buttons to choose [Off].
Since the camera focuses continuously
until you press the shutter button
On
halfway, it allows you to shoot without
missing photo opportunities.
The camera does not focus
Off
continuously, thereby conserving
battery power.
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
165
Advertisement
Table of Contents
