Canon POWERSHOT SX40HS User Manual page 160

Changing Camera Settings
Changing the Start-up Screen
You can change the start-up screen that appears when you turn on the
camera.
Registering Recorded Images as the Start-up Screen
Any previously registered start-up image will be overwritten when
registering a new start-up image.
160

Choose [Start-up Image], then press the
m button.
 Press the qr buttons or turn the 5 dial to
choose an option.
No start-up image
Preset images
1
(cannot be modified)
Preset images
2 You can set recorded images, and use the
included software to change the images.
Enter Playback mode.
Press the 1 button.

Choose [Start-up Image].

Choose [Start-up Image], then press the
m button.
Press the qr buttons or turn the 5 dial to

choose [2], then press the m button.
Choose an image.
Press the qr buttons or turn the 5 dial to

choose an image, then press the m
button.
 Press the qr buttons or turn the 5 dial to
choose [OK], then press the m button to
complete registration.