Canon POWERSHOT SX40HS User Manual page 122

Viewing Images in Filtered Playback
Search by
Target Filters
What if you cannot choose a filter?
Filters that do not have any corresponding images cannot be chosen.
Filtered playback
In filtered playback (Step 2), you can view filtered images with "Quickly Searching
Images" (p. 120), "Viewing Slideshows" (p. 124), and "Magnifying Images"
(p. 125). You can process all filtered images at once while performing operations
in "Protecting Images" (p. 128), "Erasing Images" (p. 132), or "Choosing Images
for Printing (DPOF)" (p. 152), by choosing all of the filtered images.
However, if you change the category (p. 135), or edit an image and save it as a
new image (p. 139), a message will appear, and filtered playback will cancel.
122
, , and
Choose a target filter.
 In single image playback, press the d
button, then press the op buttons to
choose a jump method.

In
choose a filter. Turning the 5 dial will only
display images that match the filter of the
chosen target image.
 Press the l button to switch between
Information Display and No Information
Display.
 Press the n button to restore single
image playback.
View the filtered images.
 Press the m button to start filtered
playback. The jump method and a yellow
frame will appear.
If you press the qr buttons or turn the 5

dial, the chosen target images will display.
 If you press the d button, [Filtered
playback settings cleared] appears on the
screen. Press the m button to cancel
filtered playback.
, press the qr buttons to
, or