Table of Contents
Advertisement
Changing the number of shots
After choosing
•
Shutting both eyes will also be detected as a wink.
•
If a wink is not detected, the shutter will release approximately
15 seconds later.
•
If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
Using the Face Self-Timer
The shutter will release approximately 2 seconds after the camera detects a
new face (p. 87). You can use this when the photographer wants to be in the
image, such as a group photo.
Detecting a Face and Shooting (Smart Shutter)
in Step 1, press the op buttons.
Choose
Follow Steps 1 – 2 on p. 61 to choose
then press the l button.
Press the qr buttons or turn the 5 dial to
choose
Compose the shot and press the
shutter button halfway.
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
.
, then press the l button.
,
73
Advertisement
Table of Contents
