Setting The Intensity Level - D.T. System Micro-iDT PLUS Series Owner's Manual

SETTING THE INTENSITY LEVEL

It is very important to set the correct intensity level on
your Micro-iDT
beginning your training sessions to provide the proper
level of stimulation without over-stimulating your dog.
1. Place the Intensity Selection dial so that the system
is set on Level 1.
2. Turn on the Collar Receiver and then fit it properly
around your dog's neck.
3. Press the 'Cont.' button and check for a reaction.
Indications of your dog feeling the stimulation
include outward signs of discomfort or confusion on
it's face, ears perking up, changes in tail
movements, etc.
4. If there are no signs of your dog feeling the
stimulation,
increments of one until your dog reacts to the
stimulation.
5. At this point, increase the Intensity Level by one or
two. This should be your dog's ideal training level.
Some dogs may require more or less stimulation depending
upon their individual temperament and/or size.
PLUS Training
increase
NOTE
16
System
the Intensity
before
Level in