Smartled - D.T. System Micro-iDT PLUS Series Owner's Manual

Micro-iDT™ PLUS Series collars are equipped with
the SmartLED battery status system. The SmartLED
system lets you know when the Collar Receiver is
charging and when the charging is complete. It also
give you a status on how much charge is remaining in
the battery and when it will need to be replaced.
When the Collar Unit is Charging:
• The SmartLED lights red while the battery is
charging.
• The SmartLED lights green when charging is
complete.
• The SmartLED has a long red blink once every other
second when there is a charging error.*
• The SmartLED flashes green once every other
second when 51% to 100% battery charge is
remaining.
• The SmartLED flashes red once every other second
when 21% to 50% battery charge is remaining.
• The SmartLED double-flashes red once every other
second when the battery charge is low and will need
charging soon.
*Charging Error - If the SmartLED has a long blink every
other second while charging, the rechargeable battery pack
will need to be replaced. New batteries may also initially
give an error light. Contact D.T. Systems if the problem
persists after a few charging sessions.

SmartLED

When the Collar Unit is ON:
10