Advertisement
QuickSpecs
Technical Specifications
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
Application
Transfer rate
HP 600 GB 6G SAS 15K LFF
(3.5-inch) Quick-release
Dual Port ENT 3y
Warranty Hard Drive
HP 300 GB 6G SAS 15K LFF
(3.5-inch) Quick-release
Dual Port ENT 3y
Warranty Hard Drive
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
574758-B21
585980-B21
DA - 12244 North America — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Physical Configuration
HP SAS Hard Drives
600,127,266,816
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
300,000,000,000
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.2ms
3.5ms
6.8ms
15,000 rpm
512
1,172,123,568
0.2ms
3.5ms
6.8ms
15,000 rpm
512
585,937,500
Page 31
Advertisement
