Advertisement
QuickSpecs
Technical Specifications
HP 300GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Application
Transfer rate
516814-B21
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
DA - 12244 North America — Version 44 — December 9, 2013
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
HP SAS Hard Drives
50° to 95° F (10° to 35° C)
300,000,000,000
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2ms
3.5ms
6.8ms
15,000rpm
512
585,937,500
Page 22
Advertisement
